Dry Construction

Lightweight fiber-reinforced concrete board with exceptional performance for interior and exterior use.

Fermacell Powerpanel H₂O is a water-resistant construction board for walls, floors, and ceilings.

The Fermacell Powerpanel TE floor element consists of two 12.5 mm thick Fermacell Powerpanel H₂O boards, factory-bonded.

A1 classification for interior finishes is increasingly in demand across Europe, particularly for public buildings utilizing dry construction methods.

Fermacell floor systems are designed for use as floating floors in a wide range of applications.

Aestuver panele lightweight concrete fiber-reinforced with cement bonded glass fibers, for high-quality fire protection.

Lightweight cement-bonded glass fiber reinforced concrete slab for protecting concrete structures in underground transport systems from higher thermal stress.

Lightweight cement-bonded glass fiber reinforced concrete slab for protecting concrete structures in underground transport systems from higher thermal stress.

Lightweight geopolymer concrete slab reinforced with glass fibers for escape routes.

For reinforcement with Fermacell Powerpanel HD Light Mortar Fermacell Powerpanel HD Reinforcement Mesh is a glass fiber reinforcement mesh, with an alkali-resistant coating and a non-slip surface, suitable for indoor and outdoor use.

Base and finishing plaster layer for Fermacell Powerpanel HD Fermacell Powerpanel HD Light Mortar is a lightweight, mineral-based, water-resistant mortar suitable for interior and exterior use.

Fermacell Powerpanel HD Joint Adhesive is a flexible, ready-to-use adhesive based on an acrylic dispersion.

Fermacell Powerpanel HD Joint Reinforcement Tape is a self-adhesive reinforcing tape with non-slip polyester fabric and reinforced strips in the centre.

For a clean finish of the Powerpanel HD edges: The Fermacell Bellcast Profile is a splayed, partially perforated angle profile with a drip edge for water drainage.

Fermacell HD Expansion Profile is a two-part, angular, and partially perforated plaster profile designed to compensate for material movements.

Fermacell Powerpanel Fine Surface Treatment is a lightweight, ready-to-use product intended for finishing interior and exterior surfaces.

The prefabricated Fermacell Powerpanel H₂O Linear Shower Outlet 2.0 element is a fast and economical dry-construction solution for installing a level-access (floor-level) shower (installation equipment is included in the installation set).

For sealing walls and floors against moisture Fermacell Waterproofing Application is a pre-mixed liquid membrane based on synthetic resin that serves as moisture protection.

For fantastic protection from water in indoor corners Fermacell Flexible Sealing Tape is a polypropylene material with a special coating, resistant to alkalis and permanently elastic.

For thin and medium-thick layers, as well as for joining Fermacell Powerpanel H₂O boards with chamfered edges Fermacell Flexible Tile Adhesive is a polymer-modified mineral adhesive, according to EN 12004, suitable for laying ceramic tiles and panels, cut tiles, decorative thin bricks, and concrete stones, in thin or medium adhesive layers according to DIN EN 197.

For pre-treatment of many types of surfaces Fermacell Deep Primer is a ready-to-use, solvent-free, dispersion-based primer suitable for walls, ceilings and floors.

For sealing around pipe joints and penetrations: Fermacell Pipe Penetration Patches are sealing covers made of elastic, alkali-resistant polypropylene material, which provide durable and watertight protection.

For filling joints between Fermacell Gypsum Fibreboard panels Fermacell Joint Filler is a gypsum-based joint filler, modified with synthetic resins, for manual joint filling – with or without the use of reinforcing tape.

For the joining of Fermacell Gypsum Fibreboard and Powerpanel H₂O boards: Recommended for professional users.